Canopy & Awning Resources
Canopy Dimensions
| Material | Aluminum Roll Form Flat Pan, Roll form W-Pan, or Extruded Flat Pan |
| Length | Any length |
| Width | Maximum: 12′ |
| Post Spacing | 12″ widthwise and lengthwise between posts |
| Span | 10′ maximum length between buildings with no posts. Buildings must have proper supports (blocking, header board…) |
| Overhang | 1′ overhang on both buildings (applies to canopies between buildings) |
| Color | What is standard, powder coating and other colors are available |
| Cutter | 4″ |
| Facia | 6″ |
| Posts | 4″ x 4″ |
| Direction Change | Standard: 90 degree (custom angles available) |
| Weather | Designed to meet local snow and wind load requirements |
Cantilever Awning Dimensions
| Length | Custom length as required |
| Projection from Building | Maximum: 5′ |
| Space Between Support Arms | Maximum: 10′ |
| Gutter Width | 4″ |
| Fascia Height | 4″ |
Downloads
How the drainage works
With a modular design, all awnings have built-in gutters. Using downspouts, water drains from post outlets, smartly channeling water away from entryways. An integrated deflector located in the post outlet controls the water flow.
Built with 100% industrial grade aluminum, the canopy and posts will not rust, deform or rot.
